While the Face Shield V2 may be cleaned with cool to lukewarm soap and water, we highly recommend rubbing alcohol (isopropyl alcohol 70%+) as this leaves no residue or chemicals which may irritate the skin. Harsh window cleaners should be avoided, especially important on surfaces that contact the skin during use!

Avoid paper towels or other abrasive cleaning products. We recommend lens cleaning cloths, microfiber towels, or cotton cosmetic wipes to clean the face shield. The elastic strap may be hand washed in soap and water but must be dried thoroughly before use.

1. Remove protective film from both sides of lens.
2. Identify the components. The clear lens has holes on two edges: the longer edge will fasten to the headband, while the shorter edge will fasten to the lower frame.
3. Starting with the left side of the headband, snap the lens onto the headband one peg at a time.
4. Snap the lower frame onto the lens, one peg at a time. The bottom of the frame piece and lens should be flush.
5. Try it on! You may adjust the elastic band to ensure comfort and secure fit.

1. Remove protective film from both sides of lens.
2. Starting with the left side of the headband, snap the lens onto the headband one peg at a time.
3. Adjust the elastic strap as necessary to ensure both comfort and secure fit.